Specifications

236 Chapter 16
Command Reference
:CORR1:CKIT:STAN2:DC
:CORR1:CKIT:STAN2:DC
Syntax [:SENSe]:CORRection1:CKIT:STANdard2:DC <numeric>
[:SENSe]:CORRection1:CKIT:STANdard2:DC?
Description Defines the dc resistance (R
dc
) value of the SHORT standard of the user-defined
calibration kit.
Parameters
If your specified parameter is beyond the valid range, the instrument ignores the parameter
and uses either the maximum or minimum value depending on whether the parameter is
greater than the upper limit or smaller than the lower limit.
Query response {numeric}<newline><^END>
See also :CORR1:CKIT:STAN1:DC on page 233
:CORR1:CKIT:STAN3:DC on page 239
Equivalent key
sequence
[Setup View] (Calibration kit setup display)
<numeric>
Description R
dc
Range -1E6 to 1E6
Default 0
Unit W (ohm)
Resolution 1E-18