Specifications

Chapter 16 219
Command Reference
:CALC:COMP:COUN
16. Command Reference
:CALC:COMP:COUN
Syntax :CALCulate:COMParator:COUNt[:STATe] {ON|OFF|1|0}
:CALCulate:COMParator:COUNt[:STATe]?
Description Lets you specify whether to use the comparator counter. Enabling this feature causes the
instrument to count the number of DUTs put into each bin based on the comparator result.
The maximum count value is 2,147,483,647 (2
31
-1). If this value is exceeded, the count
value remains 2,147,483,647 and is not updated.
The count value is not reset by execution of reset commands (*RST or :SYST:PRES).
Parameters
Query response {1|0}<newline><^END>
See also :CALC:COMP:COUN:CLE on page 219
:CALC:COMP:DATA:BCOU? on page 220
Equivalent key
sequence
No equivalent keys are available on the front panel.
:CALC:COMP:COUN:CLE
Syntax :CALCulate:COMParator:COUNt:CLEar
Description Initializes the comparator bin counter feature by resetting all of the bin counts to zero. (No
query)
Equivalent key
sequence
No equivalent keys are available on the front panel.
Description
ON or 1 Enables the bin counter feature
OFF or 0 (initial value) Disables the bin counter feature