Specifications

Chapter 16 215
Command Reference
:CALC:COMP:COND{1-4}:MODE
16. Command Reference
:CALC:COMP:COND{1-4}:MODE
Syntax :CALCulate:COMParator:CONDition{1|2|3|4}:MODE {ABS|DEV|PCNT}
:CALCulate:COMParator:CONDition{1|2|3|4}:MODE?
Description Lets you select how to specify the limit range that applies to each of the four sorting
conditions (:COND1 through :COND4). This setting applies to all of the bins.
Parameters
Query response {ABS|DEV|PCNT}<newline><^END>
See also :CALC:COMP:COND{1-4}:NOM on page 216
Equivalent key
sequence
[Setup View] (Bin sort setup display)
Description
ABS
(initial value)
Uses absolute mode, in which the upper and lower limits are specified
as absolute values.
DEV Uses deviation mode, in which the upper and lower limits are
specified as deviations relative to the reference value
*1
.
PCNT Uses percent mode, in which the upper and lower limits are specified
as percentages relative to the reference value
*1
.
*1. You can use the :CALC:COMP:COND{1-4}:NOM command to set the reference
value.