Specifications

Chapter 16 211

Command Reference

:CALC:COMP

16. Command Reference

:CALC:COMP

Syntax :CALCulate:COMParator[:STATe] {ON|OFF|1|0}

:CALCulate:COMParator[:STATe]?

Description Turns on or off the comparator. This setting is linked with the on/off status of the handler

interface.

Parameters

Query response {1|0}<newline><^END>

Equivalent key

sequence

[System] - COMPARATOR

:CALC:COMP:BEEP:COND

Syntax :CALCulate:COMParator:BEEPer:CONDition {FAIL|PASS}

:CALCulate:COMParator:BEEPer:CONDition?

Description This command is available when the instrument is configured to beep based on the

comparator result (i.e., after you have issued the :SYST:BEEP2:STAT command by

specifying “ON”). The command lets you specify whether the instrument should beep

when the DUT fails to meet the comparator sorting criteria (not sorted into any of bins 1

through 13, or sorted into the NO GOOD bin specified with the :CALC:COMP:OGB

command) or when the DUT satisfies the comparator sorting criteria (sorted into the

GOOD bin).

Parameters

Query response {FAIL|PASS}<newline><^END>