Specifications

Chapter 16 207
Command Reference
*SRE
16. Command Reference
*SRE
Syntax *SRE <numeric>
*SRE?
Description Sets the value of the Service Request enable register.
Parameters
If the parameter is out of the allowable setting range, the bit-by-bit logical product (AND)
with 255 (0xff) is set. Note that you cannot set bit 6 to 1.
Query response {numeric}<newline><^END>
See also *ESE on page 204
:STAT:OPER:ENAB on page 299
Equivalent key
sequence
No equivalent keys are available on the front panel.
*STB?
Syntax *STB?
Description Reads out the value of the Status Byte register. (Query only)
NOTE You cannot use the this command in telnet session. This command always reads out 0 when
you execute the command in telnet session.
Query response {numeric}<newline><^END>
Equivalent key
sequence
No equivalent keys are available on the front panel.
<numeric>
Description Sets value in the register
Range 0 to 255
Default 0
Resolution 1