Instruction manual

56 Chapter 3
Learning Basic Operations
How to Set Measuring Conditions
Figure 3-7 Frequency of measurement point number 3 set to 100 MHz
Step 5. Press the [1] and [G/n] keys on the entry block of the front panel consecutively and set the
frequency of measurement point number 4 to 1 GHz
(Figure 3-8).
Figure 3-8 Frequency of measurement point number 4 set to 1 GHz
Step 6. Press the [Meas View] key on the measurement block of the front panel to go back to the
first single point measurement display
(Figure 3-3 on page 53).