Instruction manual

Chapter 3 55
Learning Basic Operations
How to Set Measuring Conditions
3. Learning Basic
Operations
Step 2. Press the key in the navigation block (NAVIGATION) on the front panel twice to
move the cursor to the Frequency cell of measurement point 2 (Figure 3-5).
Figure 3-5 Cursor moved to frequency cell of measurement point number 2
Step 3. Press the [1], [0], and [M/μ] keys on the entry block of the front panel consecutively and set
the frequency of measurement point number 2 to 10 MHz
(Figure 3-6).
Figure 3-6 Frequency of measurement point number 2 set to 10 MHz
Step 4. Press the [1], [0], [0], and [M/μ] keys on the entry block of the front panel consecutively and
set the frequency of measurement point number 3 to 100 MHz
(Figure 3-7).