Instruction manual

Chapter 2 45
Installation Guide
Selection of Test Fixture
2. Installation Guide
Selection of Test Fixture
When the DUT is attached and detached by manual operation, it is possible to use special
test fixtures. Select the appropriate test fixture by referring to
Table 2-6. The options listed
in the table may not cover all conditions and characteristics, so please confirm detailed
specifications by referring to the appropriate accessory catalogs and operation manuals.
NOTE When a special test fixture is used, it is necessary to first attach the test head to the test
fixture stand (at this point, the test head’s 3.5-mm terminal is converted to a 7-mm terminal
by using the 3.5-mm-to-7-mm adapter). For details on how to attach the test head to the test
fixture stand, see “Connecting the DUT when using a special test fixture” on page 31.
Table 2-6 Usable test fixtures
Test Fixture Frequency Range Components Size (SMD)
16196A DC to 3 GHz 1608 mm/0603 inch
16196B DC to 3 GHz 1005 mm/0402 inch
16196C DC to 3 GHz 0603 mm/0201 inch
16197A DC to 3 GHz
*1
16191A DC to 2 GHz
*1
*1.  indicates the direction of contact of the test fixture's electrode.
16192A DC to 2 GHz
*1
16194A DC to 2 GHz
*1