Instruction manual

Appendix A 291

Manual Changes

A. Manual Changes

Step 7. Use the number keys ([0][1] to [9]) on the front panel to enter the “second.”

Step 8. Press the [.] key on the front panel to move the cursor to the position where “AM/PM” is

indicated.

Step 9. Press the key or key on the front panel to select “AM” or “PM.”

5. Completing the setting

Step 1. Press the key on the front panel once to move the cursor to the OK button.

Step 2. Press the key on the front panel to complete the date and time setting and close the

dialog box.

NOTE To cancel setting of the date and time, press the key or the key on the front

panel to move the cursor inside the dialog box to the Cancel button and then press the

key. If the setting of the date and time is cancelled, the date and time set and valid before

you started to make the new setting will remain in effect.

6. Turning the date and time display On or Off

The set date and time can be displayed in the date/time display area in the lower-right area

of the measurement display.

Step 1. Press the [Display] key on the front panel to show the Display softkey menu.

Step 2. Turn the rotary knob ( ) on the front panel to move the cursor in the softkey menu to

the DATE & TIME [ ] key.

Step 3. Press the rotary knob ( ) to switch the date/time display ON or OFF (the setting toggles

with each press of the button).

Miscellaneous Changes

The option system of the 4287A has changed since May 2003. Apply the following

changes.

Softkey indicator Date/time display status

DATE & TIME [LIVE] Display on (constantly updated)

DATE & TIME [STAMP] Display on (display not updated)

DATE & TIME [OFF] Display off

New Option Number Old Option Number Remark

700 (Agilent 16195B 7-mm

Calibration Kit)

001 (Without Agilent 16195B 7-mm

Calibration Kit)