Instruction manual

290 Appendix A

Manual Changes

3. Setting the date

Step 1. Press the [.] key on the front panel the required number of times to move the cursor to the

position where the “month” is indicated.

NOTE Each press on the [.] key moves the cursor inside the Date box in the following order:

Month → Day → Year → Month → ..

Step 2. Press the key or key on the front panel the required number of times to select

the “month.”

Step 3. Press the [.] key on the front panel the required number of times to move the cursor to the

position where the “day” is indicated.

Step 4. Use the number keys ([0][1] to [9]) on the front panel to enter the day.

Step 5. Press the [.] key on the front panel to move the cursor to the position where the “year” is

indicated.

Step 6. Use the number keys ([0][1] to [9]) on the front panel to enter the year.

NOTE When a mouse is used, click the down-arrow  to the right of the Date box to display the

date setting calendar (

Figure A-4). Then click the appropriate date on the calendar to

complete the entire setting of the date.

Figure A-4 Date setting calendar

4. Setting the time

Step 1. Press the key on the front panel once to move the cursor to the Time box.

Step 2. Press the [.] key on the front panel the required number of times to move the cursor to the

position where “hour” is indicated.

NOTE Each press on the [.] key moves the cursor inside the Time box in the following order: Hour

→ Minute → Second → AM/PM → Hour→ ..

Step 3. Use the number keys ([0][1] to [9]) on the front panel to enter the “hour.”

Step 4. Press the [.] key on the front panel to move the cursor to the position where “minute” is

indicated.

Step 5. Use the number keys ([0][1] to [9]) on the front panel to enter the “minute.”

Step 6. Press the [.] key on the front panel to move the cursor to the position where “second” is

indicated.