Instruction manual

284 Appendix A
Manual Changes
Manual Changes
Manual Changes
To adapt this manual to your 4287A, refer to Table A-1 and Table A-2.
Agilent Technologies uses a two-part, ten-character serial number that is stamped on the
serial number plate (
Figure A-1). The first five characters are the serial prefix and the last
five digits are the suffix.
Figure A-1 Example of Serial Number Plate
Table A-1 Manual Changes by Serial Number
Serial Number Prefix Make Manual Changes
JP1KG “Change 3”
JP1KG , M432 “Change 4”“Change 5”“Change 6”
Table A-2 Manual Changes by Firmware Version
Version Make Manual Changes
1.1x “Change 1”, “Change 2”
1.20 “Change 2”
2.0x “Change 4”“Change 5”“Change 6”“Change 7”