Instruction manual

234 Chapter 11
Setting and Using the Control and Management Facilities
Setting the Built-in Speaker (Beep Sound)
Step 2. Press the BEEPER MENU key in the softkey menu to display the BEEPER MENU softkey
menu.
Step 3. Press the BEEP WARN [ ] key in the softkey menu to turn the warning beep ON or OFF
(the setting toggles with each press of the button).
NOTE Pressing the PLAY BEEP WARN key in the BEEPER MENU softkey menu allows you to
hear the completion beep to test its operation.
Switching the beep sound that indicates the BIN sort function result
(Pass or Fail)
The following procedure is used to set whether the beep sound indicates that the BIN sort
function is “Pass” (entered in good BIN) or “Fail” (not entered in good BIN).
NOTE For how to perform the instruction “press the key (softkey) in the softkey menu”
mentioned in the procedure, see “13. Softkeys” on page 87.
Step 1. Press the [System] key on the front panel to display the System softkey menu.
Step 2. Press the BEEPER MENU key in the softkey menu to display the BEEPER MENU softkey
menu.
Step 3. Press the BEEP COMPARATOR [ ] key in the softkey menu to switch the condition for
sounding the beep (Pass or Fail) (the setting toggles with each press of the button).
NOTE Turning ON/OFF the beep sound for the BIN sort results is set by the procedure described
in “Turning the warning beep ON or OFF” on page 233.
Softkey Label Warning Beep Setting
BEEP WARN [ON] ON
BEEP WARN [OFF] OFF
Softkey Label Beep Setting According to BIN Sort Result
BEEP COMPARATOR [FAIL] Beep sounds in case of Fail (not entered in
good BIN).
BEEP COMPARATOR [PASS] Beep sounds in case of Pass (entered in good
BIN).