Instruction manual

232 Chapter 11
Setting and Using the Control and Management Facilities
Configuring the Network
Step 5. The Identification Changes dialog box (Figure 11-6) appears. Enter the computer name in
the Computer Name box (1 in Figure 11-6).
Figure 11-6 Identification Changes dialog box
Step 6. The Network Identification dialog box (Figure 11-7) appears. Click the OK button.
Figure 11-7 Network Identification dialog box
Step 7. In the Identification Changes dialog box, click the OK button (2 in Figure 11-6).
Step 8. In the System Properties dialog box, click the OK button (2 in Figure 11-5).
Step 9. The System Settings Change dialog box (Figure 11-8) appears. Click the Yes button to
restart the 4287A.
Figure 11-8 System Settings Change dialog box
NOTE Until the 4287A is restarted, changed setting does not take effect.