Instruction manual

Chapter 11 231
Setting and Using the Control and Management Facilities
Configuring the Network
11. Setting and Using the Control and Management
Facilities
Step 7. In the Internet Protocol (TCP/IP) Properties dialog box, click the OK button (6 in Figure
11-4).
Step 8. In the Local Area Connection Properties dialog box, click the OK button (3 in Figure 11-3).
Step 9. In the Local Area Connection Status dialog box, click the Close button.
Step 10. Click the × button (2 in Figure 11-2) in the upper right of the Network and Dial-up
Connections window.
Specifying computer name
Follow these steps to specify the computer name:
Step 1. Press .
Step 2. Press LAN Setup.
Step 3. Press Network Identification.
Step 4. The System Properties dialog box (Figure 11-5) appears. Click the Properties button (1 in
Figure 11-5). Press OK in the warning dialog box.
Figure 11-5 System Properties dialog box