Instruction manual

Chapter 11 229
Setting and Using the Control and Management Facilities
Configuring the Network
11. Setting and Using the Control and Management
Facilities
Step 5. When switching from disable to enable:
Double-click the Local Area Connection icon (1 in Figure 11-2) in the Network and
Dial-up connections window to enable the network connection function.
Step 6. Click the × button (2 in Figure 11-2) in the upper right of the Network and Dial-up
Connections window.
Setting IP address
Follow these steps to set the IP address:
Step 1. Press .
Step 2. Press LAN Setup.
Step 3. Press Network Configuration.
Step 4. Double-click the Local Area Connection icon (1 in Figure 11-2) in the Network and
Dial-up Connections window. The Local Area Connection Status dialog box appears.