Instruction manual

22 Chapter 2

Installation Guide

How to Install Front Handles/Rack Mounting Flanges

The Agilent 4287A can be made more convenient for use with two key options: handles

mounted on each side of the front for easy transport and flanges to attach the instrument to

a rack as part of a multi-component measurement system (

Table 2-2).

How to install handle kit (Option 1CN)

Install the handle kit by following these steps:

Step 1. Make sure that all of the contents of the Option 1CN handle kit have been supplied in the

shipping container (Table 2-3).

Step 2. Remove the trim strips from both sides of the outer frame of the Agilent 4287A front panel.

Table 2-2 Agilent 4287A rack mounting options

Name Agilent Part

Number

Description

Option 1CN handle kit 5063-9229 Two front handles used for transport and relocation of the

Agilent 4287A

Option 1CM rack-mount kit 5063-9216 Two flanges (locking side plates) for mounting the Agilent

4287A on a rack (482.6 mm wide) conforming to EIA Standard

Option 1CN rack-mount kit

and handle kit

5188-4430 Both the rack mounting flanges (locking side plates) and

handles

Table 2-3 Contents of Option 1CN handle kit

Name Quantity

Front handle 2

Screw 6

Trim strip 2