Instruction manual

Chapter 8 187
Sorting According to Measurement Results
Setting Faulty BIN (OUT OF GOOD BINS)
8. Sorting According to Measurement Results
Setting Faulty BIN (OUT OF GOOD BINS)
You can predetermine that BINs following the desired BIN number are faulty.
If a BIN is evaluated as faulty by BIN sorting, the result of OUT_OF_GOOD_BINS as
well as the BIN number is output to the handler interface.
Step 1. Click with the mouse “2. Edit” on the menu bar.
Step 2. Click “7. Out Of Good Bins” from the menu.
Step 3. From the sub-menu, click an item for the lowest-order good BIN.
For example, selecting “Out Of Good Bins: > Bin3” sets BINs 1 to 3 as good and BINs 4
to 13 as not good. A red dotted line is drawn on the boundary between the lowest good BIN
and the highest faulty BIN (
Figure 8-13).
Figure 8-13 Setting BINs 4 and lower as faulty