Instruction manual

18 Chapter 2

Installation Guide

Incoming Inspection

WARNING To avoid hazardous electrical shock, do not turn the power on if there are any signs of

shipping damage to any part of the exterior (for example, damage on the top cover,

bottom cover, side covers, front panel, rear panel, LCD display, connectors or line

switch).

Inspect the equipment by following these steps while unpacking the contents of the

shipping container.

Step 1. Check whether the shipping container or cushioning material is damaged.

If there is damage, save the shipping container and cushioning material as they are until

you have made sure that all contents (main unit and accessories) are included and you have

checked for mechanical and electrical defects.

Step 2. Use the checklist in Table 2-1 to ensure that all of the contents required for your specified

options have been packed in the shipping container.

Table 2-1 Checklist of Agilent 4287A contents in shipping container

Order Model or

Option Number

Agilent

Part Number

Description Qty

Check

(√)

Agilent 4287A - Agilent 4287A RF LCR Meter (Main Unit) 1

Test Head (with 1 m cable)

1250-2879 N(m)-SMA(f) Adapter 3

8710-2409 Wrench (for 3.5-mm/SMA connector) 1

04287-905xx

CD-ROM (Operation Manual,

Programming Manual, Sample Program)

E2078-62101

GPIB adapter

- Power Cable 1

Option 700 - Agilent 16195B 7-mm Calibration Kit 1

Option 710 - Test Fixture Stand 1

Option 720 1250-1746 3.5-mm-to-7-mm Coaxial Adapter 1

Option 810 - Keyboard 1

Option 820 - Mouse 1

Option ABA 04287-900x0

Operation Manual

04287-900x1

Programming Manual

04287-180x0

Sample Program Disk (3.5 inch floppy disk)