Specifications
Safety
Summary
The following general safety precautions must
be
observed during all phases of operation,
service,
and
repair
of this instrument. Failure to comply
with
these precautions or
with
specific
WARNINGS elsewhere in this manual may impair
the
protection
provided
by
the
equipment.
In addition it violates safety
standards
of design, manufacture,
and
intended
use of
the
instrument.
The Agilent Technologies assumes no
liability
for
the customer's
failure
to
comply
with
these
requirements.
Ground
The
Instrument
To
avoid electric shock hazard,
the
instrument
chassis
and
cabinet
must
be
connected to a
safety
earth
ground
by
the
supplied
power
cable with
earth
blade.
DO NOT
Operate
In
An
Explosive
Atmosphere
Do
not
operate
the
instrument
in
the
presence of flammable gasses or fumes. Operation of any
electrical
instrument
in such an environment constitutes a definite safety hazard.
Keep
Away
From
Live
Circuits
Operating personnel must
not
remove
instrument
covers. Component replacement
and
internal
adjustments
must
be
made
by
qualified maintenance personnel.
Do
not
replace components
with
the
power
cable connected. Under
certain
conditions, dangerous voltages may exist
even
with
the
power
cable removed.
To
avoid injuries, always disconnect
power
and
discharge
circuits before touching them.
DO NOT
Service
Or
Adjust
Alone
Do
not
attempt
internal service or adjustment unless
another
person, capable of rendering first
aid
and
resuscitation, is present.
DO NOT
Substitute
Parts
Or
Modify
Instrument
Because of
the
danger of introducing additional hazards, do
not
install substitute
parts
or
perform
unauthorized modifications to
the
instrument.
Return
the
instrument
to a Agilent
Technologies Sales
and
Service Office for service
and
repair to ensure
that
safety
features
are
maintained.
Dangerous
Procedure
Warnings
Warnings
, such as
the
example below,
precede
potentially dangerous procedures
throughout
this manual. Instructions contained in
the
warnings must
be
followed.
Warning
vi
Dangerous
voltages,
capable
of
causing
death,
are
present
in
this
instrument.
Use
extreme
caution
when
handling,
testing,
and
adjusting
this
instrument.