Specifications

5 Select the "Print Width" field. The print width toggles between 80 and

132. Select the width for your application or leave it at the default of

80.

Print width tells the printer that you are sending up to 80 or 132 characters

per line (when you Print All) and is totally independent of the printer itself.

Touch the" Print Length" field and print length toggles between 11 and

12. Select the length for your application or leave it at the default of

11.

Print length tells the printer the page length for the type of paper you are

using.

Press the front-panel Done key.

Optional RS-232C Configuration (1664A)

From the Printer/Controller menu, perform the following steps to configure

the RS-232 interface for printing:

Select the Printer Setup field.

2 When the pop-up appears, select "Printer Connected to RS-232" field,

and toggle to the

Printer selection as shown below.

3 Select the field to the right of “Printer” and when the pop-up appears,

select the printer that you’re using (like, ThinkJet or QuietJet). If

you’re using an Epson graphics printer or an Epson-compatible

printer, select

Alternate.

RS-232 Configuration Menu (1664A)

Connecting a Printer

RS-232C Printers

5–11