Specifications

RS-232C Configuration (1660A through 1663A)

From the RS-232 / GPIB menu, perform the following steps to configure the

RS-232 interface for printing:

Select the RS-232 field.

2 When the pop-up appears, select "RS-232 Connected to" field, and

toggle to the

Printer selection as shown below.

3 Set the baud rate, stop bits, parity, and protocol to match the setup

for the RS-232C printer by selecting the appropriate fields.

4 Select the field to the right of “Printer” and when the pop-up appears,

select the printer that you’re using (like, ThinkJet or QuietJet). If

you’re using an Epson graphics printer or an Epson-compatible

printer, select

Alternate.

See Also "RS-232 / GPIB Interface" chapter for more information.

RS-232 Configuration Menu (1660A through 1663A)

Connecting a Printer

RS-232C Printers

5–10