Specifications

Specifying Edges

Certain assignment fields require edge assignments to be specified. An edge

can be specified in any one of the available number bases.

You can select positive-going ( ↑ ), negative-going ( ↓ ), either edge ( ↕ ) or

no edge (

. ).

To specify an edge, perform the following exercise:

Press the analyzer Trigger MENU key.

2 Press the arrow keys to move the cursor to the Edge 1 assignment

field as shown, then press the

Select key.

Edge and Glitch Assignment Field

Edge assignment

field

Using the Front-Panel Interface

How to Use Assignment/Specification Menus

3–28