Specifications

When the channel assignment field is selected, an assignment pop-up
appears showing you the bit or channel to be assigned, and the two choices
directly above it.
Channel Assignment Pop-up
3 Turn all channels on (assign an asterisk) by either pressing the Select
key or by pressing the Up arrow key.
Individual bits or channels are highlighted by moving the cursor side to side
with the left/right arrow keys or by rotating the knob. The Select key toggles
the current choice. The up arrow assigns a channel, and the down arrow
unassigns a channel. In addition, the entire bank of channels are assigned or
cleared by pressing the Clear entry key.
4
When you are finished assigning channels, press the Done key.
Assignment pop-up
Assignment choices
Using the Front-Panel Interface
How to Use Assignment/Specification Menus
3–26