Specifications

How to Use Assignment/Specification Menus
There are a number of assignment fields which you must assign or specify
what you want the instrument to do. Menus of this type are as follows:
•
Assigning pod channels and clock channels to labels.
•
Specifying patterns.
•
Specifying edges.
Assigning Pod and Clock Channels
The channel assignment fields in both state and timing analyzers appear in
the Format menus and work identically. It should be noted that if you don’t
see any channel assignment fields, it merely means you do not have any pods
assigned to this analyzer or any labels turned on. The convention for channel
assignments is as follows:
* (asterisk) indicates assigned channels
. (period) indicates un-assigned channels
To assign channels to an analyzer, do the following exercise:
1 Press the analyzer Format MENU key.
2 Press the arrow keys to move the cursor to the channel assignment
field as shown below, then press the
Select key.
Channel Assignment Field
Channel assignment
Using the Front-Panel Interface
How to Use Assignment/Specification Menus
3–25