Specifications

How to Roll Offscreen Data
If there is offscreen data, it must be rolled back onscreen before it can be
viewed or acted upon. The types of data you typically find located offscreen
are Labels, Pods, Terms, Sequence Levels, and data listings. Each of the data
types have a roll field. These roll fields indicate offscreen data by becoming a
dark selectable field with small arrows showing the direction the data is
rolled. In addition, a roll indicator appears that indicates which rollable field
is currently active.
There are two ways to roll data. One is with the knob, the other is with the
Page keys. The following exercise demonstrates both ways by first having
you assign enough data to create offscreen data, then rolling the data.
Using the Knob
1
Press the analyzer Config MENU key.
2 Press the arrow keys to move the cursor to the A3/A4 pod pair field in
the Unassigned Pods list, then press the
Select key.
3 Press the Up/Down arrow keys or rotate the knob to move the cursor to
the custom name for Analyzer 1 as shown below, then press the
Select
key
.
You should now have pod pairs A1/A2 and A3/A4 assigned to Analyzer 1.
Configuration menu
Analyzer 1
Using the Front-Panel Interface
How to Roll Offscreen Data
3–23