Specifications

How to Configure Options

With one exception, the process of selecting an option within a pop-up menu

is the same as selecting any typical field in a main menu. When an option is

selected, it may be necessary to access several pop-up menus before all the

parameters of an option are configured. An example of selecting options is

illustrated in the analyzer Trigger menu.

Press the analyzer Trigger MENU key.

2 Press the arrow keys to highlight the Acquisition Control field as

shown, then press the

Select key.

Acquisition Control Field

3 With the Acquisition Mode Automatic field highlighted, press the

Select key.

By selecting the Acquisition Mode Automatic field, you toggle the field to

manual operation where you can configure features like the trigger position

and sample rate.

Press the arrow keys to highlight the Trigger Position Field, then press

the

Select key.

5 Press the Up/Down arrow keys or turn the knob to highlight a trigger

position setting. Then, press the

Select key.

6 To close the Acquisition Control pop-up, press the Done key.

Acquisition control

field

Using the Front-Panel Interface

How to Configure Options

3–18