Specifications

How to Select the System Menus
One of the six MENU keys is the System key. You use the System key to
access a set of menus that are used to configure system level parameters for
the I/O bus, clock, display, and the disk drive operations. To access the
menus under the System key, perform the following steps:
1
Press the System MENU key.
2 Press the arrow keys to highlight the menu Name field, then press the
Select key.
3 Press the Up/Down arrow keys or turn the knob to highlight the desired
System menu name as shown below, then press the
Select key.
System Menus Selection List
1660A through
1663A shown.
1664A displays
"Printer/Controller"
System key
Menu name field
System menu
Selection List
Using the Front-Panel Interface
How to Select the System Menus
3–13