Specifications

4 Turn the knob to highlight the file type you want to store, then press
the
Select key.
The System choice stores things like Bus and display configurations.
The Analyzer choice stores analyzer menus and measurement data.
The All choice stores System and Analyzer types.
5
Press the arrow keys to move the cursor to the file name field.
File Name Field
6 Using the front-panel keypad, type in a filename to assign to the new
file, then press the
Select key.
The filename must start with a letter and may contain up to eight characters.
It can be any combination of letters and numbers, but there can be no blank
spaces between any of the characters.
If you want to select an existing filename, simply turn the knob to scroll
existing filenames through the field. Also, notice how the cursor bar
highlights the same name in the list of filenames.
The two spaces(_ _) after the filename designates that this file is for the
system. One space and a letter (for example, "_A") after the filename
designates that the file is for the analyzer.
File name field
Disk Drive Operations
How to Store Files on a Disk
6–13