Specifications

How to Store Files on a Disk
The Store operation allows you to store instrument configurations and
measurement data. Use this operation when you want to save the present
analyzer setup to recall at a later time.
When configurations are stored to the disk, you are given the option to store
System only, Analyzer only, or All (System and Analyzer).
To store a file, perform the following steps:
1
Insert the destination disk into the disk drive.
2 Select the Store disk operation.
When the Store selection is made, the instrument reads the disk directory
and displays a list of all files on the disk. If there are no files, NO FILES is
displayed.
3
Press the arrow keys to move the cursor to the file type field, then
press the
Select key.
File Type Parameter Field
File type field
Disk Drive Operations
How to Store Files on a Disk
6–12