Technical data

58 4000 X-Series Oscilloscopes Advanced Training Guide
3 Advanced Triggering, Search & Navigation, and Segmented Acquisition Labs
Press the (zoom) front key to turn off the scope’s horizontal zoom
mode.
26 Push the horizontal position/delay knob to re- position the trigger point
back to center-screen.
27 Set the scope’s timebase to 100.0 ns/div.
28 Press the [Run/Stop] front panel to begin repetitive acquisition again.
29 Press the [Acquire] front panel key.
30 Tap the Segmented softkey; set 500 as the number of segments to
capture.
31 Tap the Segmented softkey to begin a Segmented Memory acquisition.
32 Tap the Current Segment softkey; then turn the Entry knob to review all
500 captured segments.
33 Set the Current Segment to 500 and note the time-tag of the last captured
segment.
Figure 35 Using the scope’s Segmented Memory acquisition to selectively capture 500
edge violations.