Technical data

Advanced Triggering, Search & Navigation, and Segmented Acquisition Labs 3
4000 X-Series Oscilloscopes Advanced Training Guide 57
21 Tap the Settings softkey.
22 Tap the “< >” softkey; the select “>”.
23 Press the Time softkey; enter in > 100 ns.
At this timebase setting (200 µs/div), the scope captured over a thousand
edges of this signal. And using the search conditions we entered (rising
edges that exceed 100 ns), the scope should have just found approximately
10 violation edges as shown in Figure 34. The white triangle marks at the
top of the display indicate the location of each “found” violation. Let’s now
“navigate” to each of these detected violations.
24 Press the (zoom) front panel key.
25 Press the and navigation keys to navigate to each discovered
edge violation.
Let’s now use the scope’s Segmented Memory mode of acquisition to
capture 500 consecutive occurrences of this edge transition violation. But
to complete the rest of this lab your scope must be licensed with the
Segmented Memory option.
Figure 34 The scope automatically finds several rise time violation edges.