Technical data

4000 X-Series Oscilloscopes Advanced Training Guide 3
Contents
1 Getting Started
Lab Guide—At a Glance 5
Front Panel Overview 6
Run Control 7
Waveform Controls 7
Horizontal Controls 8
Vertical Controls 9
Trigger Controls 9
Tools Controls 10
2 Oscilloscope Familiarization Labs
Lab #1: Using Cursors and Automatic Parametric Measurements 12
Lab #2: Using Zoom Display to Perform Gated Measurements 19
Lab #3: Using Waveform Math 23
Lab #4: Using Peak Detect Acquisition Mode 27
Lab #5: Using Segmented Memory Acquisition Mode 31
Lab #6: Using Mask Test 37
3 Advanced Triggering, Search & Navigation, and Segmented Acquisition Labs
Lab #7: Triggering on a Digital Burst using Trigger Holdoff 42
Lab #8: Triggering on Unique Pulses and Glitches using “Pulse-width” Trigger 46
Lab #9: Triggering on the Nth Pulse within a Burst using “Nth Edge Burst” Trigger 51
Lab #10: Triggering on and Searching for Edge Speed Violations 53
Lab #11: Triggering on and Searching for Runt Pulses 60
Lab #12: Triggering on Setup & Hold Time Violations 66
Lab #13: Triggering on a Qualified Burst using “Edge then Edge” Trigger 70
Lab #14: Triggering on Logic Patterns using the MSO’s Digital Channels 73
4 Serial Bus Decoding & Triggering, Search & Navigation, and Segmented Acquisition Labs
Lab #15: Decoding, Triggering, and Searching on I
2
C Serial Bus Signals 80