Technical data

20 4000 X-Series Oscilloscopes Advanced Training Guide
2 Oscilloscope Familiarization Labs
You should now observe 6 positive pulses with varying widths, plus an
infrequent glitch occurring after the 6th pulse as shown in Figure 8. Let’s
now turn on a “+ Width” measurement.
11 Press the [Meas] front panel key (next to the Cursors knob).
12 Press the Clear Meas softkey; then press the Clear All softkey.
13 Press the Type softkey; then press the + Width measurement.
14 Either press it again or press the Add Measurement softkey to select this
measurement.
Figure 8 Setting up the oscilloscope to capture a burst of digital pulses with different
pulse widths.