Technical data

Oscilloscope Familiarization Labs 2
4000 X-Series Oscilloscopes Advanced Training Guide 15
16 Notice the level indicator that shows where this measurement is being
performed.
17 Press the Type softkey; then select Minimum.
Your scope’s display should now look similar to Figure 4 showing four
continuously update measurements; Frequency, Vp- p, Vmax, and Vmin.
Let’s now perform four different measurements.
18 Set the scope’s timebase to 200.0 ns/div. Expanding on the pulse will
provide us with increased measurement resolution.
19 Now select to measure To p, Base, Rise Time, and Fall Time.
Figure 4 The scope automatically performs up to four parametric measurements.