Technical data

Serial Bus Decoding & Triggering, Search & Navigation, and Segmented Acquisition Labs 4
4000 X-Series Oscilloscopes Advanced Training Guide 117
Because we performed the Segmented Memory acquisition based on
triggering on LIN frame ID = 21
HEX
(or perhaps you changed the trigger
condition to trigger on ID = 12
HEX
), our Lister display now shows a list of
consecutive occurrences of just this particular frame ID as shown in
Figure 78. To find out how often the parity bit or checksum errors occur
during this particular frame, you could manually scroll through the list, or
you could use the scope’s Search & Navigation capability to locate all
occurrences of errors.
Figure 78 Lister display shows 500 consecutive occurrences of one particular LIN frame.