User`s guide

/S:<scans> Extract data only for the specified data scans (default all scans). For example: /S:0
means scan 0 only, /S:0-4 means scans 0 through 4.
/Y:<units> Y units, one or more of the following:
L=Linear, P=Power, D=Density, R=RMS
See the batch files ‘’60_ML.BAT’’ and ‘’63_ML.BAT’’ in appendix C.
Example
Convert a spectrum SDF data file to PC-Mathlab file. (converting data to Vrms^2/Hz (PsD))
SDFTOML SPEC.DAT /Y:PRD
The ‘’P’’ converts the data to V^2 (if not already power data), the ‘’R’’ converts the data to rms, and the
‘’D’’ converts the data to density units (/Hz).
Sharing Data Between Analyzers
SDFTOML
4-45