User`s guide

SDFTOASC
Convert an SDF data file to an ASCII data file and place the result in the destination file ( if it is entered).
Otherwise view the result on the screen.
Note All header information is lost when you convert to ASCII format.
SDFTOASC <sfile> [dfile] [/U] [/O] [/I] [/A] [/X] [/T:<c1>,<c2>] [/Y:<units>]
[/M:<dBmRef>] [/G:<dBRef>] [/P:<points>] [/D:<data>] [/R:<row>[-<rowEnd>][,C]]
[/C:<col>] [/S:<scan>[−<scanEnd>][,C]] [/L] [/F:<format>] [/B:<string>]
<sfile>
Input SDF file.
[dfile] Output ASCII file.
/U Show help (usage information) for this program.
/O Overwrite [dfile] if it already exists.
/I Information only on the <sfile>.
/A All the frequency lines.
/X Include X data in the file.
/T:<c1>,<c2> Y coordinates, <c1> or <c2> may be one of the following:
B=dBm, D=dB, S=dB signed, M=Mag, R=Real, I=Imag, P=Phase, U=Unwrap
phase. Default is R, I for complex data, R for real data.
/Y:<units> Y units, one or more of the following:
L=Linear, P=Power, D=Density, R=RMS, A=Radians
/M:<dBmRef> dBm impedance reference. Default is use input impedance from data file if
<1M
Ω (else use 50Ω).
/G:<dBRef> Magnitude value used as a reference for dB type of coordinates. If /G with no
parameter, then default is 20E-6 (dBSPL).
/P:<points> Number of points per line. The default is 1.
/D:<data> Select data for the specified SDF_DATA_HDR. The default is 0.
Sharing Data Between Analyzers
SDFTOASC
4-39