User`s guide

ASCTOSDF
Convert the source file to the destination file and place the result in the destination file. The following
options are only valid when used with the /T (template SDF file) option; /D, /R, /C, /S. The options
described after the /T option are only used if a template SDF file is not specified.
Syntax ASCTOSDF <sfile> <dfile> [/U] [/O] [/D:<data>] [/R:<row>] [/C:<col>[ [/S:<scan>]
[/T:<sdffile>] [/H:<type>] [/B:<blksize>] [/L:<lines>] [/Z:<ctrFrq>] [/X:<s,d>[,L]]
Options
<sfile> Input ASCII file.
<dfile> Output SDF file.
/U Show help (usage information) for this program.
/O Overwrite <dfile> if it already exists.
/D:<data> Select data for the specified SDF_DATA_HDR. The default is 0.
/R:<row> Select data for the specified row. The default is 0.
/C:<col> Select data for the specified column. The default is 0.
/S:<scan> Select data for the specified scan. The default is 0.
/T:<sdffile> Template SDF file. If you already have a file (for example, a frequency response
file) set up, use this option to copy that file and replace the data with the input
ASCII file.
/H:<type> Create default headers, where type is:
Time–timedata(thedefault).
LSpec – linear spectrum
PSpec – power spectrum
FRF – frequency response
Sharing Data Between Analyzers
ASCTOSDF
4-15