User`s guide

69TOSDF
Convert data from the HP 3569A source data file and put results in the destination SDF file. If [dfile] is
not specified, the destination SDF filename is chosen based on the filename that was used in the
HP 3569A and is of the form <filename>.DAT (for example, 1.DAT).
If the input X32 file contains more than 1 HP 3569A trace file (SAVE/RECALL, XFER ALL TRACES),
then each trace will be put in a different file with the same base name as used on the HP 3569A. If [dfile]
is specified, only the first trace in the file is used.
Syntax 69TOSDF <sfile> [dfile] [/U] [/O] [/H] [/A] [/P:c,p,d][/M:<value>][/D:<value>]
Options
<sfile> Input HP 3569A data file name.
[dfile] OptionaloutputSDFdatafilename.
/U Show help (usage information) for this program.
/O Overwrite [dfile] if it exists.
/H Print headers to the screen.
/A Print headers and data to the screen.
/P:c,p,d Set point and direction for a channel (/P:). <c>is the channel number (0 or 1),
<p> is the point number, and <d> is the direction as follows:
0 None 5 Theta
1X 6 Phi
2Y 7 TX
3Z 8 TY
4Radial 9 TZ
/M:<value> Set microphone separation for FFT Intensity data in mm.
/D:<value> Set density for FFT Intensity data in Kg/m
3
Sharing Data Between Analyzers
69TOSDF
4-9