User`s guide

Not a valid LIF
file system
The disk does not contain a valid LIF volume header. Check your disk,
it is either a DOS disk, or the disk is corrupt.
Notavalid
format option
The format option specified on the LIF INIT command is not valid for
this disk drive. For example, only the format options 0 through 4 are
valid on an HP 9122 disk drive. Refer to your disk drive operator’s
manual for allowable format options. For HP 9122 or HP 9127 format
options, see command LIF INIT.
Not a valid interleave The interleave value specified on the LIF INIT command is not valid for
this disk drive. The allowable values for interleave are 0 through X-1
where X is the number of usable sectors per track. For example, an
HP 9122 with 256 byte sectors has 16 sectors per track, so an interleave
of 0 through 15 is valid.
Out Of Memory Not enough memory to read the disk directory or to contain the file
system control structures. Free up some memory.
Sector size not supported Sector size of 512 bytes for a 5 1/4" drive is not usable because it can
only be formatted (on a HP 9127A) as DOS format (not LIF ). If it is a
3.5" disk, the disk was not formatted with an HP-IB disk drive (HP 9121
or HP 9122 compatible) or the disk is corrupt.
Unknown Option ‘X’ This error may be generated by all the commands. Check your options.
Typing the command with /U will list the valid options. Options are not
case sensitive or order dependant.
File System Conversion (LIF/DOS)
Error Messages
3-26