User`s guide

Discussion
When you type in the name of a file (except where /N is specified), this utility automatically converts a
valid LIF file name as follows:
• Shifts lower to upper case.
• Allows ‘’_’’, ‘’.’’, and digits (0-9).
• Translates all other characters to the letter ‘’X’’.
• If the first character is not a letter, then the file name will be preceded by the letter ‘’X’’.
• Truncates file names to 10 characters.
Caution Be careful with this command; a DOS directory on an external HP-IB disk drive (for
example, an HP 9133D) is actually a LIF directory with one entry (for example,
VOLUME000) and can be removed with this utility only by specifying the /F option.
File System Conversion (LIF/DOS)
LIF RM
3-16