User`s guide

Installation
To install the Standard Data Format Utilities, copy all files on the two disks to any directory on your PC.
Or, if you do not have a hard disk, you can insert the disk in an internal drive and type commands from
there.
Note If you are running the utilities from a floppy drive, you cannot address LIF files in that
drive.
The following files are on the disks:
60_ML.BAT 89TOSDF.EXE SDFPRINT.EXE
60_MX.BAT ASCTOSDF.EXE SDFTEXT.EXE
60_PLOT.BAT DEFECT.TXT SDFTO58.EXE
60_SDF.BAT DFDATA63.EXE SDFTO63.EXE
60TOSDF.EXE DFHDR63.EXE SDFTOASC.EXE
63_ML.BAT DOWNLOAD.EXE SDFTOBIN.EXE
63_MX.BAT HEADER63.EXE SDFTOML.EXE
63_PLOT.BAT HPIB63.EXE SDFTOMX.EXE
63_SDF.BAT IB63_ML.BAT SDFTOSDF.EXE
63TCSDF.EXE IB63_MX.BAT SDFYDATA.EXE
63TOSDF.EXE IB63_PLT.BAT SETUP63.EXE
660TOSDF.EXE IB63_SDF.BAT SETUP88.EXE
69_ML.BAT LIF.EXE SETUP89.EXE
69_MX.BAT LIFDIAG.EXE SOFTCOPY.EXE
69_PLOT.BAT README.TXT SYNTH63.EXE
69_SDF.BAT REPEAT.EXE USAGE.TXT
69_TOSDF.EXE REVID VIEWDATA.EXE
88TOSDF.EXE SDFEDIT.EXE X32TOBIN.EXE
If you want to use the SDF libraries, you must also copy the following files from the
directory SDFLIB:
README.TXT SDF.C SDF.MAK
SDF_BASI.H SDF_COMM.H SDF_UTIL.H
SDFADD.C SDFDATA.C SDFMPY.C
SDFUTIL.LIB
General Information
Installation
1-10