User`s guide

You can compare old data from an HP 3562A to new data from an HP 35665A, as shown in figure 1-3.
You can convert the HP 3562A data from LIF to DOS, then from HP 3562A format into SDF, then recall
it into an HP 35665A for comparison. Or you can convert HP 35665A data from SDF format to
HP 3562A format, then convert it from LIF to DOS, then recall it into an HP 3562A for comparison.
Figure 1-3. HP 3562A to HP 35665A
Batch Files
Appendix C contains several example batch files. These are ‘’automated’’ procedures that combine two
or three utilities. For example, ‘’63_SDF.BAT’’ performs the LIF-to-DOS conversion and the
HP 3563A-to-SDF conversion on a group of files. You can use the existing batch files, or you can copy
and modify them for your particular needs.
General Information
Data Sharing Between Analyzers
1-6