User`s guide

Active menu
File: A B C A&BA/B/C Scan Help
Hot Keys: ABC & / S H
A Make trace A active.
B Make trace B active.
C Make trace C active.
A&B Set the active Trace to the A & B traces. Any changes to the display attributes of
the A trace are also changed for the B trace. In this mode, markers are moved on
the A trace.
A/B/C Set the active Trace to the A & B & C traces. Any changes to the display attributes
of the A trace are also changed for the B & C traces. In this mode, markers are
moved on the A trace.
Scan Specify the active scan of a multi-scan trace (a waterfall or map). The first scan is
scan 0. In the waterfall format, all scans are displayed, but the marker only applies
to the active scan. In all other formats, only the active scan is displayed.
Help Display help information.
Discussion
All trace commands (except Format) act only on the active trace. You can set different trace attributes for
each trace. The marker moves only in the active trace.
To get data into a trace, either read data from a file or use CopyTo (under Display, Data) to copy data
from one trace to another trace.
Viewdata
5-12