User`s guide

File menu (if Type is ASCII)
File: Type Read Points Offset Xvalues Scans Help Quit
Hot Keys:TRP OXS HQ
Type Set the type of file (ASCII, SDF, or 3563/2 data file).
Read Read an ASCII file containing numbers. Numbers must be delimited by comma or
Viewdata will not read the imaginary data . (Use option “/B ,” for SDFTOASC
when reading ASCII data into Viewdata.) Each line contains one point consisting
of an optional X value followed by a real Y value, followed by an optional
imaginary Y value.
Points Specifies the maximum number of points in a scan. If there are more points in the
file, they are ignored.
Offset Specifies a number of points at the beginning of the file to skip before reading the
specified points.
Xvalues Specifies whether the first number on each line is an X value for the data point.
Scans Specifies the maximum number of scans (or map lines) in the file. If there are more
scans in the file, they are ignored. The total number of values read from the file is
(Points * Scans).
Help Display help information.
Quit Quit the File menu and return to the Viewdata main menu.
Viewdata
5-10