User`s guide

VIEWDATA
Syntax
VIEWDATA [/D:<data>] [/S:<scans>] [/R:<row>] [<fileA>] [<fileB>] [<fileC>] [/U]
[/T:<title>] [/K:<keyFile>] [/E:<echoFile>] [/P] [/P:<plotfile>] [/I:<iniFile>]
[/A:<ascFile>] [/O:<ovlFile>] [/W:<wideCnt>] [/H:<highCnt>]
[/N:<pltNum>] [/M:<time>]
/D:<data>
Specify data result in file (default is result 0 if /P)
/R:<row> Specify row in file (default is row 0 if /P)
/S:<scans> Specify scan in file (default is scan 0 if /P). Can specify a range separated by ‘’-’’
(for example, /S:0-5).
<fileA> Data file to read into Trace A.
<fileB> Data file to read into Trace B.
<fileC> Data file to read into Trace C.
/U Show help (usage information) for this command.
/T:<title> Set the trace title (up to 30 characters) to be displayed on the X-axis of the data. If
the title is empty, the measurement title from the data file is used. If you want to
use a space in the trace title, surround the title with quotes (for example, “Trace
Title”).
/K:<keyFile> Specify file from which to read key presses (redirect input).
/E:<echoFile> Specify file to echo (record) key presses (useful for playing back keys using the /K
option).
/P Plot/print data and then exit program.
/P:<plotFile> Plot/print data to specified file and then exit program. (See batch files
‘’60_PLOT.BAT’’ and ‘’63_PLOT.BAT’’ in appendix C.)
/A:<ascFile> Dump ASCII data to specified file and then exit program.
/I:<iniFile> Specify configuration file to read instead of VIEWDATA.INI. (See ‘’Config’’ in
the Save menu.)
/O:<ovlFile> Specify file which contains HP-GL text/graphics to overlay upon the trace.
/W:<wideCnt> The number of plots per page wide.
Viewdata
5-5