User`s guide

The menu line for Viewdata contains a menu name followed by a set of command words on the top line
on the display. Each command has one letter in red on a color display (bright white on monochrome
display) indicating the hot key for that command. The currently selected command is in inverse video (on
color display, entire word in bright white on monochrome display).
There are two ways to execute a command:
• Press the hot key.
• Press the left or right arrow keys to change the active command, then press the [
Enter
]keyto
execute that command.
Figure 5-3 is the first screen that appears when you start Viewdata. The menu bar is across the top of the
screen. In this example, File is the active command. The hot keys for the other commands are
highlighted.
The rest of the screen contains information about the Viewdata setup and the data in the active trace. This
information is updated whenever you change the setup or the active trace.
Figure 5-3. Viewdata main screen
Viewdata
5-3