User`s guide

Example
Copy a setup state file from the HP 3588A LIF formatted disk and convert it to ASCII format:
LIF CP B:STATE1 STATE1.88
SETUP88 STATE1.88 STATE1.ASC
State1.ASC will contain a list of setup parameters. The following is an example list.
Measurement_mode Swept Spectrum
Low_distortion Off
Oversweep On
Peak_detector On
Center_frequency 7.505e+007
Span 1.499e+008
Start_frequency 100000
Stop_frequency 1.5e+008
Manual_frequency 7.505e+007
Frequency_step_size 1000
Frequency_step_mode Auto
Signal_track Off
Resolution_BW 17000
Video_BW 26248
Video_filter Off
etc. +
Discussion
• All integers, reals, and long reals will be converted to ASCII.
• Strings will be surrounded by double quotes (“).
• Enumerated types will be converted to ASCII integers (if /E:0 is specified).
Sharing Data Between Analyzers
SETUP88
4-58