Programming instructions

Front-Panel Operation 39
of the View menu automatically.
If there are errors (the ERROR annunciator is on), the first error in
the error queue is displayed. Press the arrow key to scroll the display
to show the whole error message;
3. Turn the knob to view other errors in the error queue, or press Enter
to return to the first level of the View menu, the ERROR annunciator
turns off;
4. Press View again to exit the View menu operation, the VIEW
annunciator turns off.
Note All errors are cleared once the error queue is viewed, and the ERROR
annunciator turns off. Refer to Appendix B starting from Page 122 for
details about the instrument errors.
To View a Scan List To view the channels included in a scan list (assuming channels 103-107 are
included in the scan list):
1. Press View (VIEW annunciator lights up). Turn the knob until
“SCAN LIST” is displayed, then press Enter;
2. The first channel in the scan list is displayed on the channel area.
Continuously turn the knob to view other channels in the scan list;
3. Press Enter to return to the first level of the View menu;
4. Press View again to end this operation, the VIEW annunciator turns off.
NO ERROR 108
01:ERR -109
MISSING PARAMETER
SCAN LIST 101
001 OF 005 103
SCAN LIST 107