Programming instructions

26 Getting Started
Agilent N2269A
Multifunction Module
16-Bit D/A Port:
s40, s42
16-Bit Memory Access Port:
S50
Digital I/O:
individual Bits: s00, s01,..., s30, s31
8-Bit Port: s00, s01, s02, s03
16-Bit Port: s00, s02
16-Bit D/A Port:
s44, s45
16-Bit Memory Access Port:
S58
Digital I/O:
individual Bits: s00, s01,..., s30, s31
8-Bit Port: s00, s01, s02, s03
16-Bit Port: s04, s05
Agilent N2270A
10-Channel High Voltage MUX
Module
s00, s01,..., s08, s09 s00, s01,..., s08, s09
Agilent N2272A
1GHz RF 1-to-9 MUX Module
s00, s01,..., s07, s08 Not supported.
Agilent N2276A/B
Dual 1-to-6(4) Microwave
MUX/Atttenuator Module
Two 1-to-4(6) Microwave Switch:
s00, s01, s02, s03(, s04, s05);
s10, s11, s12, s13(, s14, s15).
Two Attenuator:
s20; s30.
Not supported.
Agilent N2280A
Quadruple 1-to-2 Optical Switch
Module
Group0: s00, s01
Group1: s10, s11
Group2: s20, s21
Group3: s30, s31
Group0: s00, s01
Group1: s10, s11
Group2: s20, s21
Group3: s30, s31
Agilent N2281A
Dual 1-to-4 Optical Switch Module
Group0: s00, s01, s02, s03
Group1: s10, s11, s12, s13
Group0: s00, s01, s02, s03
Group1: s10, s11, s12, s13
Agilent N2282A
1-to-8 Optical Switch MUX Module
s00, s01, s02... s07.
Not supported.
4-Bit Built-in Digital I/O
Individual Bits: 091, 092, 093, 094;
4-Bit Port: 090.
Same as in SCPI mode.
a. For an Agilent 3499A, the Slot Number = 1-5; for an Agilent 3499B, the Slot Number = 1-2; for an Agilent 3499C, the Slot Number
= 1-9.
b. A channel number on a matrix module is formed in Slot-Row-Column format, i.e., channel address s23 means row 2, column 3 in
Slot s.
c. Agilent N2260A can be used as an 80-channel 1-wire MUX module, a 40-channel 2-wire MUX module, two 20-channel 2-wire
MUX modules, or a 20-channel 4-wire MUX module in SCPI mode.
d. The Low (L) terminals of the 40 2-wire channels form the first 40 1-wire channels (Channels 00-39), and the High (H) terminals of
the 40 2-wire channels form the second 40 1-wire channels (Channels 40-79).
e. The first channels (CH00 & CH20) of either banks (BANK 0 and BANK 1) form Channel 00, the second channels (CH01 & CH21)
of either banks form Channel 01, and so on.
f. In 3488A mode, Agilent N2260A is used as a 40-channel 2-wire MUX module.
Table 2-1. Plug-in Modules Channel Addressing
Agilent P/N
Descriptions
Channel Addressing
(snn, s = Slot Number
a
; nn = Channel Number)
SCPI Mode
3488A Mode